Epoxy Flooring in Lockeford, CA

Epoxy flooring in Lockeford often means a shop floor before a garage floor. Lockeford is a rural community east of Lodi, and every resident counted in the 2020 census lived in an area classed as rural. Properties here tend to have more room, and that room often holds a detached shop, a pole barn or a building for tractors, trucks and trailers. Those floors work harder than a typical suburban garage.

Named for a river crossing

Dean Jewett Locke and his brother Elmer settled here in 1851. Dean Locke built a ranch and later the town, and in 1859 his wife Delia coined the name Lockeford after the ford he built across the Mokelumne River. Today the town is a California Historical Landmark (No. 365), and it sits on State Route 88, one of four routes that cross the Sierra Nevada in the region.

What rural floors deal with

Shop and equipment floors in Lockeford see things a house garage rarely does:

• Hydraulic fluid, diesel and motor oil from tractors and trucks
• Steel implements, jack stands and dropped tools
• Mud and gravel tracked in from unpaved yards
• Heavy loads parked in one spot for months

Bare concrete soaks up oil and fuel, and dropped steel chips the surface. A thick coating seals the slab so spills sit on top, and a broadcast of flake or quartz adds texture so the floor is not slick when it is wet or oily.

Get a Free Estimate

Systems we use in Lockeford

Commercial & Winery Floor Epoxy is our heavier option for shops and equipment buildings. It goes on thicker than a standard garage system and holds up better to point loads and impact.

Epoxy Flake Floors suit a home garage or a shop where the owner wants a cleaner look. The chips hide dirt between cleanings.

Polyaspartic Floor Coating works as a topcoat over either one. It cures fast, so a shop is out of use for less time, and it resists yellowing where the big door stays open to the sun.

Garage Floor Coating is our standard house-garage system, from grinding through the topcoat.

Big doors and bare slabs

Many outbuildings were poured as plain slabs with little finishing and no vapor barrier, and some have never been sealed. We check for moisture, grind the full floor, and repair spalls at the door where heavy tires have broken the edge. If the slab has settled unevenly, we will tell you what can be leveled with patching and what cannot.

Homes that stay in the family

The 2020 census counted 1,237 housing units in Lockeford, and 77.9% of occupied homes were lived in by their owners. When a family plans to keep a property for years, a properly prepared floor is worth the extra prep. We give you a written quote with each step listed so you can see where the work goes.

Planning around the season

Rural shops are often unheated and open to the weather, so slab temperature on install day follows the air. Late spring and fall give the steadiest conditions. In summer we start at first light and finish coats before the building heats up. In winter we wait for a dry stretch so the slab is not damp from rain blowing under the door. We would rather move a date than coat a floor that is too cold or wet to cure well.

We also plan where your equipment goes while we work. A shop floor has to be empty for grinding and for the full cure, so we give you a clear date for moving things out and a clear date for moving them back in.

Call (209) 720-2888 to set up a visit to your Lockeford property.